[1]黄戈,姚宝珍,冉雪磊.引信对极薄弱目标发火的作用方法[J].探测与控制学报,2019,41(04):36.[doi:.]
 HUANG Ge,YAO Baozhen,RAN Xuelei.The Ignition Method of Fuze Impacting on Extremely Weak Target[J].,2019,41(04):36.[doi:.]
点击复制

引信对极薄弱目标发火的作用方法()
分享到:

《探测与控制学报》[ISSN:1008-1194/CN:61-1316/TJ]

卷:
41
期数:
2019年04
页码:
36
栏目:
出版日期:
2019-08-26

文章信息/Info

Title:
The Ignition Method of Fuze Impacting on Extremely Weak Target
文章编号:
1008-1194(2019)04-0036-06
作者:
黄戈1姚宝珍2冉雪磊2
1.陆军装备部驻武汉地区军事代表局,湖北 武汉 425000;2.湖北三江航天红林探控有限公司,湖北 孝感 432000
Author(s):
HUANG Ge1 YAO Baozhen2RAN Xuelei2
1. The Military Representative Office in Wuhan, Wuhan 425000, China; 2. Hubei Sanjiang Space Honglin Detective & Control Co. Ltd, Xiaogan 432000, China;
关键词:
引信极薄弱目标发火作用弹道安全
Keywords:
fuze extreme weak target lgnition trajectory safety
分类号:
TJ431.3
DOI:
.
文献标志码:
A
摘要:
本文针对引信对极薄弱目标发火的适应性,提出了基于低过载惯性开关的极薄弱目标发火作用方法,同时对弹道安全性进行了设计。通过ANSYS-LSDYNA与ADAMS联合仿真计算方法,火炮试验及全弹道飞行试验对该方法进行验证。验证结果表明,设计的低过载惯性开关对极薄弱目标能够可靠发火,且该设计方法能够保证弹道的安全性。
Abstract:
Aiming at the fuze adaptability to lgnition of extremely weak target ,this paper proposed a method of lgnition of extremely weak target based on low overload inertia switch,and designed the ballistic safety. The method was verified by ANSYS-LSDYNA and ADAMS joint simulation method, gun test and full ballistic flight test. The verification results showed that the designed low overload inertia switch could fire reliably to the extremely weak target, and the designed method could guarantee the safety of the trajectory.

参考文献/References:

[1]安晓红,张亚,顾强.引信设计与应用[M].北京:国防工业出版社,2006.
[2]焦志刚,钟大鹏,王宏伟,等.穿甲爆破弹引信对薄弱目标的灵敏度分析[J].探测与控制学报,2015,37(4):1-5.
[3]曹苏雅拉图,王雨时,王强,等.尾翼弹碰击薄弱目标前冲过载系数变化规律[J].探测与控制学报,2012,34(2):19-24.
[4]安晓红,顾强,张亚,等.机电引信擦地炸惯性发火机构设计与分析[J].弹箭与制导学报,2010,30(3):85-87.
[5]刘璞,施坤林,黄惠东.钢板侵彻过载的三维数值模拟[J].探测与控制学报,2006,28(1):25-28.
[6]Livermore Software technology corporation[C]//LS_DYNA Keyword users’manual.California Livermore: 1992-2003.
[7]John G R,Cook W H. Fracture characteristics of three mentals subjected to various strains,strain rates,temperatures and pressures[J].Engineering Fracture Mechanics,1985,21(1):31-48.
[8]张学伦,刘宗伟,张团,等.弹丸侵彻运动钢板的数值模拟[J].兵器装备工程学报,2017,38(4):32-36.
[9]曹苏雅拉图,王雨时,王强,等.头部形状和着角对弹丸碰击薄目标前冲过载系数仿真研究[J] .弹箭与制导学报,2012,32(5):94-97.

相似文献/References:

[1]马宝华.现代引信的控制功能及特征[J].探测与控制学报,2008,(01):1.
 MA Bao-hua.Control Function and Characteristics of Mordern Fuzes[J].,2008,(04):1.
[2]岳明凯,金 浩,魏永合,等.基于标准建模语言的引信工艺参数管理系统[J].探测与控制学报,2008,(01):11.
 YUE Ming-kai,JIN Hao,WEI Yong-he,et al.Analysis of the Process Parameter Management System for Fuze Based on UML[J].,2008,(04):11.
[3]高 杨,赵 翔,赵兴海,等.激光起爆引信及其关键技术[J].探测与控制学报,2008,(01):18.
 GAO Yang,ZHAO Xiang,ZHAO Xing-hai,et al.Laser Initiation Fuze and Its Crucial Technologies[J].,2008,(04):18.
[4]罗锦宏,黄汉琛,任光亮.非线性调频引信[J].探测与控制学报,2008,(01):25.
 LUO Jin-hong,HUANG Han-chen,REN Guang-liang.Non-linear Frequency-modulated Fuze System[J].,2008,(04):25.
[5]石庚辰,李 华.引信MEMS安全系统研究[J].探测与控制学报,2007,(06):1.
 SHI Geng-chen,LI Hua.Study on MEMS Safety and Arming Device of Fuze[J].,2007,(04):1.
[6]陈双宾,康兴国,李蓉.斜侵彻条件下刚性弹丸轨迹的一种实时计算方法[J].探测与控制学报,2007,(05):13.
 CHEN Shuang-bin,KANG Xing-guo,LI Rong.A Real-time Algorithm for the Penetration Trajectory of Rigid Projectile Oblique[J].,2007,(04):13.
[7]冯鹏洲,朱继南,吴志亮.美国典型MEMS引信安全保险装置分析[J].探测与控制学报,2007,(05):26.
 FENG Peng-zhou,ZHU Ji-nan,WU Zhi-liang.Analysis of US Typical MEMS Fuze Safety & Arming Device[J].,2007,(04):26.
[8]石庚辰,李华.引信MEMS机构结构特点研究[J].探测与控制学报,2007,(05):1.
 SHI Geng-chen,LI Hua.Reasearch on the Structure Characteristics of MEMS Fuze Mechanism[J].,2007,(04):1.
[9]王雨时.解决23 mm航炮榴弹引信炮口炸问题的技术途径[J].探测与控制学报,2007,(05):6.
 WANG Yu-shi.Technical Scheme to Solve Muzzle Burst Problem of Fuze for 23 mm Caliber Aircraft Cannon HE Projectile[J].,2007,(04):6.
[10]揭涛,施坤林.旋转稳定弹弹道修正引信减旋装置研究[J].探测与控制学报,2007,(05):9.
 JIE Tao,SHI Kun-lin.Study on Despining Device of Course Correction Fuze for Spin stabilized Projectile[J].,2007,(04):9.

备注/Memo

备注/Memo:
稿日期:2019-04-10
作者简介:黄戈(1976—),男,四川万源人,硕士,研究方向:军品质量管理。E-mail:532375337@qq.com。
更新日期/Last Update: 2019-09-12