我们的网站为什么显示成这样?

可能因为您的浏览器不支持样式,您可以更新您的浏览器到最新版本,以获取对此功能的支持,访问下面的网站,获取关于浏览器的信息:

|本期目录/Table of Contents|

引信MEMS远距离解除保险机构(PDF)

《探测与控制学报》[ISSN:1008-1194/CN:61-1316/TJ]

期数:
2008年03期
页码:
1
栏目:
出版日期:
2008-06-26

文章信息/Info

Title:
Fuze’s MEMS Delay Arming Device
文章编号:
1008-1194(2008)03-0001-04
作者:
石庚辰李华
机电工程与控制国家级重点实验室北京分部,北京 100081
Author(s):
SHI Geng-chenLI Hua
Beijing Branch,National Key Laboratory of Electromechanical Engineering and Control,Beijing 100081,China
关键词:
MEMS远解机构引信 特征分析
Keywords:
MEMS delay arming devicefuzecharacteristic analysis
分类号:
J430.1
DOI:
.
文献标识码:
A
摘要:
针对微机电系统(MEMS)加工技术的特点,对引信MEMS远距离解除保险机构与传统引信机构在结构上的差异进行分析,提出引信MEMS远距离解除保险机构形态的特点,及在设计时应注意的一些问题。
Abstract:
Considering the characteristics of MEMS fabrication technology,the structural differences between fuze MEMS and traditional delay arming devices are analyzed.The structural characteristics of fuze MEMS delay arming device and the problems that should be paid attention to are put forward.

参考文献/References

[1]马宝华.引信构造与作用[M].北京:国防工业出版社,1984.
[2]刘明杰,石庚辰,王华,等.小口径火炮机械触发引信设计思想[D].北京:引信动态特性国防科技重点试验室(北京分部),2000.
[3]Robinson C H,Wood R H,Hoang T W.Development of Inexpensive,Ultra-Miniature MEMS-based Safety and Arming(S&A)Device for Small-Caliber Munition Fuzes[C]//US Army Tank Automotive Command(TACOM)Armament Research Development and Engineering Center Fuze Division,USA:NDIA,2002:105-110.
[4]Robinson Charles H,Wood Robert H,Bayba Andrew,et al.MEMS Safety and Arming Device for OICW[C]//Small Arms Conference,Army Armament Research Development and Engineering Center Adephi MD.UAS:NDIA,2001:22-29.
[5]石庚辰,李华.引信MEMS安全系统研究[J].探测与控制学报,2007,29(6):1-5.
[6]王利,纪霞.形状记忆合金在引信上应用的研究[J].探测与控制学报,2006,28(6):44-46.
[7]刘子星.基于磁流变体的引信安全机构研究[D].北京:北京理工大学,2006.

备注/Memo

备注/Memo:
*收稿日期:2007-12-27
作者简介:石庚辰(1950-),男,陕西西安人,硕士,教授,研究方向:微机电系统技术、引信技术。
更新日期/Last Update: 2008-07-11