我们的网站为什么显示成这样？

可能因为您的浏览器不支持样式，您可以更新您的浏览器到最新版本，以获取对此功能的支持，访问下面的网站，获取关于浏览器的信息：

|本期目录/Table of Contents|

可用于MEMS加工的金属粉末注射成型工艺

《探测与控制学报》[ISSN:1008-1194/CN:61-1316/TJ]

期数:
2010年03期
页码:
1
栏目:
出版日期:
2010-06-26

文章信息/Info

Title:
Metal Powder Injection Molding for MEMS Processing
文章编号:
1008-1194(2010)03-0001-05
作者:
石庚辰
机电工程与控制国家级重点实验室北京分部，北京100081
Author(s):
SHI Gengchen
Beijing Branch,National Key Laboratory of Electromechanical Engineering and Control,Beijing 100081,China
关键词:
引信; 微机电系统（MEMS）; 金属粉末注射成型（MIM）; 工艺
Keywords:
fuze; MEMS; metal injection molding (MIM); processing
分类号:
TJ430.5文
DOI:
.
文献标识码:
A
摘要:
为了促进MEMS在引信中的推广应用，针对引信界对MEMS零件加工工艺了解不多的现状，综述了金属粉末注射成型工艺。该工艺具有适合于各种金属、陶瓷、复合材料成型，精度可满足引信零件要求，大批量生产成本低廉等特点，已在航空、航天、汽车、电子、医疗、机械等许多行业得到应用。据此，提出了该技术应用于引信MEMS及其他微小型零件加工的建议。
Abstract:
The developments and achievements of MIM (Metal Injection Molding) processing technology was summarized in this paper,because of the lack of knowledge about fuzes’ MEMS processing.MIM technology is suitable for molding of various metals,ceramics and composites,and has been widely used in fields of aviation,aeronautics,automobiles,electronics,medical and mechanics.The machining precision of MIM can meet the demand of fuzes’ parts,and the cost for mass production is inexpensive.Therefore,this paper proposed some suggestions on the application of MIM technology to process MEMS parts of fuzes.

参考文献/References

［1］石庚辰,李华.引信MEMS远距离解除保险机构［J］.探测与控制学报,2008,30(3):1-4.
SHI Gengchen,LI Hua.Fuze’s MEMS delay arming device［J］.Journal of Detection & Control,2008,30(3):1-4.
［2］石庚辰,李华.引信MEMS安全系统研究［J］.探测与控制学报,2007,29(6):1-5.
SHI Gengchen,LI Hua.Study on MEMS safety and arming device of fuze［J］.Journal of Detection & Control,2007,29(6):1-5.
［3］石庚辰,李华.引信MEMS机构结构特点研究［J］.探测与控制学报,2007,29(5):1-5.
SHI Gengchen,LI Hua.Reasearch on the structure characteristics of MEMS fuze mechanism［J］.Journal of Detection & Control,2007,29(5):1-5.
［4］Robinson C H,Hoang T Q,Gelak M R,et al.Materials,Fabrication,And Assembly Technologies For Advanced MEMS-Based Safety And Arming Mechanism For Projectile Munitions［R］.USA:J F Rasmussen Axsun Technologies,2006.
［5］张永华,丁桂甫,彭军,等.LIGA相关技术及应用［J］.传感器技术,2003,22(3):60-64.
ZHANG Yonghua,DING Guifu,PENG Jun,et al.Related technologies and applications of LIGA［J］.Transducer and Microsystem Technologies,2003,22(3):60-64.
［6］段柏华,曲选辉,林冰涛,等.MIM 用金属粉末的现状及发展［J］.粉末冶金工业,2008,(4):31-35.
DUAN Bohua,QU Xuanhui,LIN Bingtao,et al.Present Status and Devepoment of Metal Powder in MIM［J］.Powder Metallurgy Industry,2008,(4):31-35.
［7］张驰,徐博,吴紫光,等.金属粉末注射成型技术在现代兵器工业中的应用［J］.重庆工学院学报(自然科学版),2007(7):21-24.
ZHANG Chi,XU Bo,WU Ziguang,et al.Application of metal injection moulding(MIM) technology in modern ordnance industry［J］.Journal of Chongqing University of Technology(Natural Science),2007(7):21-24.
［8］乔斌,姬祖春,李映平,等.金属注射成型技术的研究［J］.材料导报,2006,(S2):240-251.
QIAO Bin,JI Zuchun,LI Yingping,et al.The status of metal injection molding［J］.Materials Review,2006,(S2):240-251.
［9］易健宏,史文芳.金属粉末注射成型技术及其发展动态［J］.矿冶工程,2001(2):4-8.
YI Jianhong,SHI Wenfang.The technology of metal powder injection molding and its development［J］.Mining and Metallurgical Engineering,2001(2):4-8.
［10］曹勇家.金属注射成型发展的机遇和挑战［J］.粉末冶金工业,2001(3):7-17.
CAO Yongjia.The developing opportunity and challenges of metal injection molding［J］.Powder Metallurgy Industry,2001(3):7-17.

备注/Memo

备注/Memo:
*收稿日期：2009-10-13    修回日期：2010-03-21
作者简介：石庚辰(1950-)，男，陕西西安人，硕士，教授，研究方向：微机电系统技术、引信技术。E-mail：shigengchen@bit.edu.cn。
更新日期/Last Update: 2010-07-13